Correct, Complete Parts
Correct, complete, and acceptable parts for each model — the right components and finishes for the purchase order.
Quality Control
Assembly-Stage Quality Control for B2B Bathroom Hardware Orders
We confirm parts, assembly, function, appearance, and packing before cartons ship. This runs at our Foshan site, for project, distributor, and OEM / private label orders.
Certificates and test reports cover specific models, so please check the scope against your product list. For factory-side kitting and export preparation, see Factory & Supply Capability.
QC Approach
Our Assembly-Stage QC Focus
For assembled bathroom hardware, we focus on four practical outcomes. We call this assembly-stage quality control — it covers the steps from parts check to packing for each order.
The Process
Eight Control Steps
The exact checks depend on the product mix and what you confirm at quotation. We adjust the checklist to match your order. These eight steps are the overview.
-
01
Part and model confirmation
Model, finish, and quantity checked against the order. Applies to all categories.
-
02
Surface appearance
Scratches, dents, finish mismatch, and visible defects. Applies to all categories.
-
03
Seals and installation parts
O-rings, gaskets, screws, brackets, and templates present. Faucets, showers, floor drains, commercial fittings.
-
04
Assembly fit and secure check
Handles, bodies, brackets, and connections tightened correctly. Applies to all categories.
-
05
Function and movement
Handles, switches, sliders, sensors, and moving parts. Faucets, showers, floor drains, commercial fittings.
-
06
Leak, flow, and drainage checks
Water test, spray pattern, and drainage action when required. Faucets, showers, floor drains, commercial fittings.
-
07
Final appearance re-check
Post-assembly surface and alignment, so handling marks are caught before packing. Applies to all categories.
-
08
Accessory pack and packing review
Screw packs, labels, inner protection, and carton marks. Applies to all categories.
By Category
QC Focus by Product Category
Each category has its own failure points. We adjust the checklist to match what you order.
Faucets & Taps
- Model, finish, and surface condition vs order
- Cartridge, seals, handles, aerator, and hose/spec alignment
- Hot/cold orientation and handle smoothness when applicable
- Leak and shut-off checks when function testing is included
Showers
- Head, hose, rail, bracket, and accessory set matching
- Spray pattern, switching, and connection points when function checks apply
- Hose and wall connections reviewed for leaks when tested
- Install parts and inner protection before carton close
Bathroom Accessories
- Model, finish, welds, and stability (bars, hooks, holders, shelves)
- Screw holes, bases, and parallel alignment on multi-bar sets
- Installation screw packs and templates complete before packing
- Surface wipe-down and anti-scratch inner pack
Floor Drains
- Size, material, finish, and cover fit
- Odor core / mechanism action and seal parts present
- Drainage path clear; accessories and labels matched to model
Commercial & Public Fittings
- Model, function, and power/battery config vs order (sensor, delay, flush, dispenser)
- Sensor reaction, valve action, and leak checks — confirm scope at quotation
- Install bases, screw packs, and protective packing for plated and electronic surfaces
- Carton marks reflecting model, quantity, and power specs when applicable
Testing capability
Function, Pressure, and Corrosion Testing
Testing scope is confirmed for each order and product. We do not apply every test to every item — we match checks to the model and market.
- Water pressure testing. A TÜV Rheinland supplier site audit confirmed this capability at our site. We apply it based on the product and order scope.
- In-house salt spray testing. For selected surface-finish products, we check corrosion resistance. Ask us whether it applies to your products.
- Function and sensor checks. Handles, switches, sensors, and valve action are tested when included in the order — especially for electronic and sensor models.
Packing checks
Packing and Carton Mark Checks
Before loading, we check inner packing, protection, labels, and shipping marks against your requirements — with photos or short videos when useful. These are real packing formats we run.
Inner Pack & Accessory Check
Protection & Inserts
Carton & Shipping Marks
Labels & Barcodes
Factory-side blister layout, neutral box programs, and export prep: Factory & Supply Capability
Compliance
Certificates and Test Report Scope
VeriBath operates under ISO 9001:2015 quality management for hardware manufacturing and sales. This covers our company-level quality system. We have also completed a TÜV Rheinland supplier site audit as a bathroom hardware supplier, confirming our preparation and production steps on site.
We hold SGS, GSO, CE, and REACH reports for specific models. Below is the current scope — send us your list and we will confirm which reports apply:
- SGS material testing — faucet models C01, L2560
- GSO water efficiency — models C02C, MB39C (for Gulf markets)
- CE (EMC) — automatic sensor soap dispensers in the UP/UD series (e.g. UP13, UD10)
- REACH SVHC — towel rack models GHA22, GHA20S, and GHA36
Send your model list and market requirements early. We will confirm which certificates and reports cover your products before quotation.
Next step
Send Your List — We’ll Confirm Scope and Options
Share your product list, model references, photos, and quantity. Also include finish, packing needs, target country, and any certification needs. We will review the items and suggest suitable options for quotation.